Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
8. USE AND MAINTENANCE OF THE
BATTERY AND BATTERY CHARGER
This section provides the main instructions on the use of the battery. For more detailed and
specific information please refer to the manual provided by the manufacturer of the pedal assist
system.
CHARGING AND USE OF THE BATTERY
You cannot use the battery immediately after purchase. Batteries begin to deteriorate from the
very first time they are charged. After purchase, and after the bicycle is stored for an extended
period of time, charge the battery just before you intend to use it. The battery must be charged
with the designated charger. Always charge it before use. The charging time depends on the
battery level and the charger used. Please refer to the user manual of the charger for the stated
charging time. We recommend the use of a genuine SHIMANO battery. If you use a battery from
another manufacturer, please read the relevant instruction manual carefully before use. Open the
E-TUBE PROJECT app and click "Check connection" to determine whether the battery used is an
original SHIMANO battery or another brand.
When charging the battery, use the specified SHIMANO charger and follow
the instructions for charging conditions. Failure to follow these instructions
may result in overheating, explosion or ignition of the battery.
When charging the battery while it is mounted on the bike, be careful not
to trip over the charging cable and avoid getting anything getting caught
in it. Failure to do so could result in injury or the bike falling over, damaging
components.
For more information about this topic:
•
CHARGE LEVEL
•
INSTALLING AND REMOVING THE BATTERY
•
TECHNICAL DATA
•
ERROR MESSAGES AND TROUBLESHOOTING
•
BATTERY HAZARDS AND ACCIDENT PREVENTION
refer to the manual provided by the manufacture of the pedal assist system for detailed
instructions and procedures SHIMANO.
47
Werbung
Kapitel
Inhaltsverzeichnis
Fehlerbehebung
