Klarstein ENERGIEWENDE Bedienungsanleitung Seite 70

EN
70
Cleaning the ash container of the exhaust air chamber
The ash container of the exhaust chamber is fixed on the rear bottom of the
combustion chamber.
• Remove the rear cover of the furnace.
• Remove the screws from the two covers of the exhaust air device.
• Remove the cold ash with an ash extractor.
• Make sure the gasket is tight before refitting the cover.
Empty and clean the
screw conveyor
Remove and clean the ash container
(see picture on the right).
Clean heat
exchanger tubes with
a brush
Remove and
clean plates
Remove
plate
Remove and
clean the ash
container