STEINEL HPD2 IP Bedienungsanleitung Seite 9

7. Datenzugriff
Zugriff über den Webbrowser. http://hpd2-address/api/sensorstatus.php
• Melden Sie sich mit dem Admin-Passwort an.
REST API
Commands in json-file
„AppVersion": „3.2.3"
„AverageFps5": 0.850314
„UptimeHHMMSS": „672:56:35
„IrLedOn": 0
„DetectedPersons": 0
„PersonPresence": 0
„DetectedPersonsZone": [0, 0, 0, 0, 0, 0, 0, 0, 0, 0]
„PersonPresenceZone": [0, 0, 0, 0, 0, 0, 0, 0, 0, 0]
„DetectionZonesPresent": 0
„GlobalIlluminanceLux": 39.0
„LuxZone": [0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0]
„GlobalLightValue": 72
„Temperature": „27.745661"
„Humidity": „25.286158"
current version of HPD application
fps averaged through 5 frames
time from last power up
state of IR leds
number of detected persons
1 if DetectedPersons > 0, else 0
number of detections in each zone
1 if DetectedPersonsZone > 0, else 0 for each zone
1 if any zone is defined, else 0
luxes measured from whole picture or from zones union if
there are any zone defined
luxes in each zone
average brighntess of picture (0-255)
measured temperature (°C)
Humidity (%)
– 9 –