STEINEL HPD2 IP Bedienungsanleitung Seite 10

GB – Quick Installation HPD2 IP
1. Connection
1.1
• Create a PoE supply via the LAN interface.
• Connect a PC or laptop to the micro-USB port on the underside of the HPD2.
Your PC will now show a new network adapter.
Configure this with IPv4 address 10.88.0.1
Note:
For maximum safety, we recommend integrating the sensor into a separate building management network.
2. Login
2.1
– Default IP address when connected via the LAN interface: 192,168,1,200
– Default IP address when connected via the micro-USB interface: 10.88.0.2
• Enter the IP address of the HPD2 in your browser (see manual).
The password for the first login is 'adm123'.
6.1
– 10 –
- 8 -