yeedi vac station Bedienungsanleitung Seite 31

No. Malfunction
The robot fails to self-empty
10
the Dust Bin.
There is debris in the Dust
11
Container.
The robot leaks dust or debris
12
while cleaning.
13 The Base is dirty.
Possible Causes
The Dust Bin is not installed.
The Dust Bag is full.
The Self-empty Outlets on the Dust Bin is
stuck by debris.
Dust Evacuation Tube is blocked.
Fine particles are absorbed inside the Dust
Container through the Dust Bag.
The Dust Bag is damaged.
The Self-empty Outlets are stuck by debris.
Main Brush has debris on it and requires
cleaning.
Solutions
Please install the Dust Bin with two Self-empty Outlets on
the bottom.
Replace the Dust Bag and close the Dust Container Lid.
Uninstall the Dust Bin and clean the debris on the Self-
empty Outlets.
Clean the Dust Evacuation Tube.
Clean the Dust Container Lid and inner wall.
Check the Dust Bag and replace it.
Uninstall the Dust Bin and clear the debris.
Clean the Main Brush.
31
EN