yeedi vac station Bedienungsanleitung Seite 30

No. Malfunction
The water is not coming out of
7 the Reservoir when Robot is
mopping.
The reservoir drops out of
8
place during cleaning.
The robot does not start
9 emptying after returning to the
Self-empty Station.
30
EN
Possible Causes
The water inlet filter on the bottom of
Reservoir is clogged.
The Reservoir runs out of water.
The water outlets on the bottom of Robot are
clogged.
The reservoir is not properly installed.
The Dust Container Lid is not closed.
The Dust Bag is not installed to the Self-
empty Station.
Manually move The robot to the Self-empty
Station will not trigger self-emptying.
The robot returns to the Self-empty Station
running Video Manager in the App.
Do Not Disturb mode is enabled in yeedi
App.
The Dust Bag is full.
If the possible causes are excluded, it might
be a component malfunction.
Solutions
Unscrew the water inlet on the bottom of Reservoir and
clean the filter.
Add water into the Reservoir.
Check the water outlets on the bottom and clean.
The reservoir is properly installed when it clicks into
place.
Close the Dust Container Lid.
Install the Dust Bag and close the Dust Container Lid.
In order to make sure The robot starts self-empty
successfully, avoid picking up and moving the Self-empty
Station during the cleaning.
This is normal.
This is normal. Disable Do Not Disturb mode in the App,
or start self-emptying manually.
Replace the Dust Bag and close the Dust Container Lid.
Please contact customer service.