Nimco ZP 8000 Gebrauchsanleitung Seite 26

EN
8. Now you can hang the mirror. The holes in the frame of the mirror goes on the screws and hang the mirror slowly few milli-
metres down. The mirror is now installed!
For the models marked ZP 8000 - ZP 59999
The mirror is not equipped with any control. It is turned on/off through the switch of the light located in the house. Two-button
switch is recommended for individual choice of lighting in the bathroom.
For models marked ZP 8000V - ZP 59999V
The mirror is equipped with a control – touch switch. It is turned on/off by touching the centre of the sensor. It is possible to set
the color of lighting with these models (color temperature or chromaticity) by holding your finger on the sensor. Color temperature
ranges from 2700K (warm white) to 6000K (cool white) or the other way around. Color temperature is automatically saved to the
memory. When turning on the mirror next time, the saved color temperature will be used.
26
navod-bez-7.2.indd 26 navod-bez-7.2.indd 26
7. Instructions for assembly
ZP 8000 - ZP 59999
ZP 8000V - ZP 59999V
Use
26.08.2021 14:14 26.08.2021 14:14