Instructions For Assembly; Zp 8000 - Zp 59999 Zp 8000V - Zp 59999V - Nimco ZP 8000 Gebrauchsanleitung

Power supply
Front fuse
Input
Appliance class
Weight
Light source
Light source life
Ballast
IP Code
The mirror consists of aluminium frame comprising various profiles according to the type, of a size 20-50 x 20-50 mm. Mirror of
various shapes and sizes (width and height: 400 – 1500 mm, thickness of glass: 5 mm) is stuck on the frame. There is an access to
the power supply from the back side of the mirror through the metal cover with stainless steel screws. Variants of the product are
based on size, shape of the mirror (rectangular, square, oval, round with sharp edges, round edges, etc.), aluminium frame and dif-
ferent LED lighting (warm white / cool white). Electric connection remains the same. The LED strips are glued to the luminaire with
a thermally conductive adhesive. It is not necessary to change the light source, due to its long life. For inspection purposes or at the
end of the LED luminaire's lifetime, the light source can be disconnected by removing the metal cover and then detached from the
light source holder. End users cannot change the light sources due to permanent damage to the product.
Light source in this type of mirror is irreplaceable, after the lifespan is over, the whole mirror needs to be exchanged.
Electric diagram
Products of article numbers: ZP 8000 – ZP 59999:
L
Power supply
5-50W
230V
N
SELV
PE
Products of article numbers: ZP 8000V – ZP 59999V („V" with a switch for on/off and changing the colours warm / cool white):
L
Power supply
5-50W
230V
N
SELV
PE
The light is determined to be attached to wall or another suitable inner surface.
The light can be installed in the area around the basin or around the shower or bath but it cannot be placed in zones 0+1+2 (see
the pictures in the paragraph Instructions for Assembly – installation on wall). Connecting to electricity network requires a qualified
electrician and must be done according to the regulation 50 Sb/78. Connect the supply cable (at the back side of the mirror) to
the existing mains in the wiring box placed preferably behind the mirror. If there is already a supply cable in the wall, it is possible
to connect it with the mirror cable on the back side of the mirror by the terminal box (article number ZP 01 – not included in the
package). It is highly recommended that the installation is accomplished by two persons.
For the assembly use a pair of wall plugs and screws which are included in the package. These are determined for brickwork with a
standard plaster thickness. For other types of wall use appropriate attachment components.
navod-bez-7.2.indd 23 navod-bez-7.2.indd 23

7. Instructions for assembly

ZP 8000 - ZP 59999
ZP 8000V - ZP 59999V
Technical specification
230 V AC 50 Hz, L+N+PE
10 A max RCD (Fi) 30 mA..
5-50 Watt
I.
Max 20 kg
LED strip, cool white / warm white
up to 50 thousand hours.
1 – 2 x ballast for 12 V DC SELF
IP 44
-
12V
LED
+
LED
Instructions for assembly
EN
23
26.08.2021 14:14 26.08.2021 14:14