eta Fogos Mini 1623 Bedienungsanleitung Seite 22

GB
– The appliance is equipped with a thermal cut-out that will
interrupt power supply (to the fan heating spirals), if the
appliance dangerously overheats. If overheating occurs,
switch off the appliance, disconnect it from the power
supply, remove any obstacles preventing the air flow, and
let the appliance cool down for about 10 minutes. If the
cut-out occurred for reasons other than air flow reduction,
have the appliance repaired by a specialised service centre.
– When handling the appliance, avoid causing any injury
(e.g. burns).
– Before every connection or disconnection of the appliance
from power supply make sure that switch A1 is in 0 position.
– Do not place any device with open flame in the air flow
coming out from the appliance because of danger of
burning process interruption.
– Never expose yourself (or animals) to the air flow for an
extended period of time. It may cause health problems.
– Only use original components designed for this type.
– Never put fingers or other objects into inlet and outlet holes
of the fan.
– Only use this appliance for the purpose it was designed for,
as specified in this manual. Never use the appliance for any
other purpose.
– WARNING: There is a risk of injury when the appliance is
not used correctly (not in accordance with the manual).
– All texts in foreign languages and pictures shown on the
packaging or the product itself, are translated and explained
at the end of this language mutation.
– The manufacturer assumes no responsibility for any damage
caused by improper handling of the appliance and its
accessories (e.g. electric shock, fire), and the appliance
guarantee will become void if any of the aforementioned
safety instructions are not observed.
22
/ 52