Philips Lumea Comfort SC1982 Bedienungsanleitung Seite 19

3 After about 1 second, the READY/skin colour
warning light comes on. This shows that the appliance
is ready to release a flash.
4 Press the on/off/intensity button one or more
times to choose the intensity level suitable for the
treatment area and your skin colour.
5 Make sure that the treatment area is clean,
dry and properly shaved. Place the skin contact
surface on the skin. When the skin contact surface is
in full contact with the skin, the READY/skin colour
warning light starts blinking slowly.
6 Press the flash button. The skin colour sensor checks
the colour of your skin. If the skin colour allows safe
treatment, the READY/skin colour warning light goes
off. The appliance delivers a flash to the skin and
makes a soft popping sound.
Note: If the appliance releases no flash and the READY/skin
colour warning light blinks rapidly, your skin colour is too dark
for safe treatment. If you have recently tanned skin, wait for
2 weeks (see chapter 'Contraindications, precautions and
warnings', section 'Warning about sun exposure and tanning').
ENGLISH
19