Safety Instructions - LIVARNO 1002-W Bedienungs- Und Sicherheitshinweise

Casing material: Aluminium/Plastic
Rated ambient -21°C to +25°C
temperature:
Mounting height: up to 3m
Suitable
conductor
cross-section for H05RN-F, 3x 1,0 mm²
power supply
terminal:
z Safety instructions

Safety instructions

WARNING!
RISK OF FATAL INJURY AND
ACCIDENTS FOR INFANTS AND
CHILDREN! Never leave children
unsupervised with the packaging material.
There is a danger of suffocation from the
packaging material. Children often
underestimate the dangers. Always keep
children away from the product.
This product can be used by children aged
„
8 years and over, as well as by persons
with limited physical, sensory or mental
abilities or lacking in experience and
knowledge if they have been supervised
and instructed as to the safe use of the
product and understand the resulting
hazards. Do not let children play with the
product. Cleaning and maintenance may
not be carried out by children without
proper supervision.
SUFFOCATION RISK! Keep the product,
„
packing/protective foil and small parts
away from children. Children may swallow
small parts or protective foil and choke or
suffocate on them.
Do not use the product if you notice any
„
damage.
Once the lamp has reached its end of life,
„
it must be disposed of in accordance with
local disposal regulations.
The LEDs are non-replaceable.
„
RISK OF ELECTRIC SHOCK! Incorrect
„
electrical installation or a power supply
voltage that is too high can potentially
cause electric shocks.
Installing this product involves working on
„
the mains electricity supply so it may only
be carried out by a competent person
according to the national regulations for
installation and connection in the country of
use.
Never tamper with or modify the product.
„
If the product has any identifiable faults,
„
stop using it immediately.
Do not open up the casing and only have
„
the product repaired by qualified
professionals. To that end you should
contact a specialist repairer. No liability or
warranty claims are accepted in cases
where repairs have been carried out by
unauthorised persons or the product has
been incorrectly wired or used.
The manufacturer/distributor of this product
„
accepts no responsibility whatsoever for
personal injury or damage resulting from
incorrect installation or use.
Do not exceed the specified mains voltage
„
(see "Technical data").
Do not immerse the product in water or any
„
other liquids.
Keep the product away from naked flames
„
and hot surfaces.
Install the product in a position where it will
„
be protected from rain.
Before starting installation, cleaning or
„
maintenance work or if ever a fault occurs,
remove the mains fuse or switch off the
circuit-breaker for the circuit. Use a voltage
tester to check that the product is isolated
from the power supply.
RISK OF INJURY! Incorrect handling of
„
the product may potentially result in
personal injury.
GB/IE/NI/CY/MT
51