7. Playback setup
Use this to set the playback mode under UPnP / DLNA compatible streaming: repeat all,
repeat once or random.
8. Resume play options
Resume once ready
The device starts in the last set mode.
Stay at home
The device always starts in the main menu.
9. Dimmer
Mode
1) Normal: The display remains at the same brightness level. The display is not
dimmed.
2) Dim: The display is darkened after 20 seconds if there is no operation on the
radio.
Level
1) Bright: Adjust the brightness in normal mode.
2) Dim: Use this to set the brightness in dimming mode.
10. EQ
Different equalizers can be set. Alternatively, you can also press the [ / EQ] button to
access the menu.
11. Buffer time
Sometimes internet radio playback can be uneven. This can happen when the internet
connection is slow or network congestion occurs. To improve the situation, you can choose
a longer buffer time to get a few seconds of radio stream before starting playback. The
default is 2 seconds. You can choose 5 seconds if you prefer a longer buffer time.
12. Information
Displays the network and system information of your radio. If you use your PC to manage
the "My Favourite" list, you have to use the IP address and you can see this information
here. Then enter the IP address (Configuration> Information> Network Information> IP) in
the browser input window of your PC
13. Software update
Perform a software update. Only if a software update is available.
14. Reset to default
Resets the device to the factory settings. All settings are reset.
17
GB