Operating Instructions; Safety Precautions - SLAT AESI C24 Bedienungsanleitung

Congratulations,
You have just acquired an AESI emergency power supply by SLAT, and we thank you for your choice.
This manual includes instructions for the installation, commissioning and maintenance of this equipment.
In order for the equipment to work properly, we recommend that these instructions be followed very carefully.
This equipment is designed to be connected to the 115V or 230V public distribution network.
To avoid any risk of electric shock, all INTERVENTIONS must be carried out with the equipment SWITCHED OFF .
One easily accessible disconnect must be installed for this purpose outside the material.
Interventions with the equipment switched on are authorized only when it is impossible to switch the equipment off. The
operation must only be performed by qualified personnel.
Standards, directives and protection of the environment and public health
All products of the AESI range are compliant with LV and EMC directives (immunity and emission). They are compliant with
standards:

EN 60950-1 (2006) + A11 (2009) + A1 (2010) + A12 (2011) + A2 (2013) (TBTS class)

EN 61000-6-1(2007), EN 61000-6-2 (2005), EN 61000-6-3 (2007), EN 61000-6-4 (2007) + A1 (2011)

EN 50130-4 (2011),

EN 55022 (2006)+ A1 (2007) class B

UL1950 for components.
They are also certified compliant with the following trade standards:

EN 54-4 (1997) + A1 (2002) + A2 (2006) : Fire detection and fire alarm systems. Part 4: power supply equipment.

EN 12101-10 class A (2005): Smoke and heat control systems. Part 10: power supplies

VdS 2593 (2002) :

VdS 2541 (1996) : Energieversorgungseinrichtungen Anforderungen und Prüfmethoden
The DoP numbers and CE marking years are available on APPENDIX.
SLAT is ISO 14001 certified since 2008.
SLAT manufactures all its products in accordance with RoHS and WEEE environmental directives.
SLAT recycles its products at the end of their service life through its recycling programme.
0786
Our warranty is three years from the date of delivery (ex-works). It is strictly limited to reimbursement or replacement (at
our discretion and without compensation of any sort) of parts recognised as faulty by our services, following return of the
product to our premises at the buyer's expense. The replacement or repair of equipment is possible only on our premises.
In order to allow our customers to benefit from the latest technical improvements, SLAT reserves the right to make all
necessary modifications to its products. The battery is not included in the warranty.
All manuals and user guides at all-guides.com

10 OPERATING INSTRUCTIONS

Safety precautions

Elektrische Energieversorgungseinrichtungen für natürliche RWA, Anforderungen und Prüfmethoden
Warranty
13