Maintenance; Fuses; Troubleshooting Procedure - SLAT AESI C24 Bedienungsanleitung

In order to ensure maximal and durable service, we strongly recommend that your product be maintained clean
and ensure that it is installed in a dry and ventilated location. We shall in no case be liable for damages associated
with improper use or incorrect maintenance of the equipment.
WARNING
Replacing the battery with a battery of incorrect type may result in an explosion hazard.
Used batteries must be disposed of in compliance with recycling requirements.
If the AESI does not deliver voltage

Check mains presence on the mains terminal strip

Check the fuses

Check the voltage value on terminals load1 and/or load2

The voltage on the battery cables must be identical to that of the load

Check that each 12 Vdc battery has a voltage greater than or equal to 11.5 Vdc

Repeat the measurement after having disconnected the load and the battery

Recheck the signalling of the indicator lights (see chapter 14)

If all the steps are validated, check the compatibility of your load
If the battery does not take over after a mains fault

Check the voltage on the battery terminals

Check the battery fuse

Check the voltage on terminals load1 and/or load2
If the indicator lights are not illuminated

Check mains presence on the mains terminal strip

Check the battery connection (and the battery fuse)

Check that the wire ribbon is properly connected

Check the voltage on terminals load1 and/or load2
For additional technical assistance, contact the SLAT hotline
+ 33 (0) 4 78 66 63 70
For return requests, visit our website:
http://en.slat.fr/support-2/rma-customer-service/request-an-rma-number/
or contact SLAT After-Sales Service to obtain an RMA (Return Material Authorisation) number.
Returns are not accepted without an RMA number.
All manuals and user guides at all-guides.com

16 Maintenance

Ref.
Primary fuse F1
User 1 fuse F8
User 2 fuse F7
Battery fuse FBat

18 Troubleshooting procedure

17 Fuses

2A
5x20 T3,15A
5x20 T3.15A
5x20 T3.15A
4A, 30V
Automatically
resettable
20
3A
5x20 T3,15A
5x20 T3.15A
5x20 T3.15A
4A, 30V
Automatically
resettable