auna AV2-CD850BT Bedienungsanleitung Seite 23

Connecting the speakers
• The speakers must have the correct impedance (read "Choosing
Speakers"), otherwise they may be damaged.
• Do not let the bare speaker wires touch each other or other metal parts,
as this could damage the unit or the speakers.
• Make sure that the polarity of the speaker wires is correct, "+-" to +-"
and "--" to "--". If this wiring is not followed, the sound will be unnatural
and hollow.
Connection to the speaker system
Connect the speaker terminals to wires of a suitable gauge. Clamp the
insulation approx. 10 mm above the wire. If the bare wire is loose, clamp it
tight.
EN
23