english
7
Cabinet installation
The ISpac isolators can be used over a wide temperature range. Depending on the isolator
version and installation method may result in different maximum ambient temperatures.
Follow the instructions of the "ISpac cabinet installation guideline"
•
Device may fail because of high ambient temperature.
•
The manufacturer's liability and warranty expire.
The cabinet need to be built in a way which allows to operate the device within the
o
specified temperature range
The cabinet installation guide is available on www.stahl-ex.com.
8
Arrangement and fitting
8.1
Dimensions
8.2
Installation
The device may be installed in Zone 2, Zone 22 or outside of the hazardous area.
In the case of operation in Zone 2 or Zone 22, the apparatus must be fitted in an enclosure
which complies with the requirements of IEC/EN 60079-15 (e.g. in an enclosure type 8146
from the R. STAHL Schaltgeräte GmbH company).
!Warning
Vibration Transducer Supply Unit Type 9147
Operating Instructions
Screw terminals
Spring clamp terminals
Size X
108 mm
128 mm
17