In Case Of Connecting The Camera To The Xdsl/Cable Internet Network - Samsung SCC-C6475 Benutzerhandbuch

In case of connecting more than 2 cameras to an IP router
1. Set each SCC-C6475(P) Port differently.
Example) No.1 SCC-C6475(P) – RTSP Control port: 554
No.2 SCC-C6475(P) – RTSP Control port: 557
I
After completing every setup, Click the Apply button.
- SCC-C6475(P) will be reboot if the IP-related setting is changed
I
Finally, set the Port Forwarding in order for IP router to handle the access
requirement about the assigned IP to each SCC-C6475(P) camera.
I
IP router Port Forwarding setting can be designated at the Application &
Gaming © Port Range Forward page.
I
As the Example in the figure, designate the TCP and UDP Port to the SCC-
C6475(P) camera that is connected to the IP router.
Each port that is set to the IP router should be set to the Port number that is
set at the SCC-C6475(P) IP setup page.
3-15
TCP Streaming port: 555
UDP Streaming port: 8000 (8000~8009)
Upload port: 556
TCP Streaming port: 558
UDP Streaming port: 8010 (8010~8019)
Upload port: 559
I
After completing the Port Forwarding setting to the SCC-C6475(P), Click
the Save Settings and save the setting value.
I
Completing the above setting, User can access the SCC-C6475(P) and
monitor the monitoring image by using the Local PC connected to the IP router
and also monitor the image to access the external IP router Remote PC.
In case of accessing in the Local PC, user can access it by using the
-
private IP (Example: 192.168.1.200) designated to SCC-C6475(P).
IP or DDNS address of the IP router in case of accessing in the
-
External Remote PC. Access using (Example:
cfffe42.websamsung.net).
I
DDNS Address is composed of 6 figures at the end of SCC-C6475(P)
MAC Address, Alphabet 'c', and the combination of domain name
"websamsung.net".
Example) If the MAC Address of SCC-C6475(P) is 00:00:f0:ff:fe:42,
DDNS Address = c + fffe42 + websamsung.net =
cfffe42.websamsung.net
3) In case of connecting the camera to the xDSL/Cable
internet network
Modem
INTERNET
SCC-C6475
SCC-C6475(P)
DDNS Server
(Data Center, KOREA)
I
If the user connect the camera to the ADSL/Cable modem directly not
using the IP router, assign the network setting in the SCC-C6475(P)
IP setup page to ADSL or Cable Modem.
I
In the beginning, in order to access the setup page in camera, use the
SCC-C6475(P) Cross Lan Cable first, and connect user PC directly.
RJ-45 Cross Lan Cable will be enclosed with products.
Cross Ethernet Cable
SCC-C6475
SCC-C6475(P)
Modem
Remote PC
3-16
E