Installation; Operation - Manhattan CONTOUR 178198 Anleitung

Contour • User Manual
Thank you for purchasing the MANHATTAN
specifications, go to manhattan-products.com.

Installation

1. Remove the battery compartment cover, insert the included AA battery
and replace the cover.
2. Plug the receiver into a USB port on your computer. The operating
system will detect the new device and automatically install the
driver(s).
Page
forward
Page
back

Operation

• Operate the mouse within 10 m (33 ft.) of the receiver, and avoid placing
obstacles between the mouse and the receiver (when it's plugged into
a USB port) that can interfere with the transmission signal.
• Press the DPI button to cycle through the 3 resolution settings: 1000, 1500
and 2000 dpi.
• The mouse automatically enters a sleep mode after approximately 8
minutes of inactivity to save power. Press any key or scroll to wake it.
2
178198_01_man_ML1.indd 2
ENGLISH
Contour, Model 178198. For
®
Scroll
wheel
DPI
button
Battery
compartment
(cover removed)
English
Optical
sensor
USB micro
receiver
7/24/12 2:33 PM