Installation; Operating Tips - Manhattan 177139 Bedienungsanleitung

MLX Wireless Laser Mini Mouse • User Manual
Thank you for purchasing the MANHATTAN
177139. To view a datasheet with a full list of features and specifications, go to
www.manhattan-products.com.

Installation

1. Press the battery compartment cover release and remove the cover.
2. Insert the two included AAA rechargeable batteries and replace the cover.
3. Set the Power switch to On.
4. If the Low Power LED flashes, charge the mouse by connecting it to the computer using
the included retractable USB cable. NOTE: The mouse can be used while it charges; a full
charge requires 8-10 hours.
5. Plug the receiver into a USB port on the computer. The operating system will detect the
new device and automatically install the driver(s).
Low Power
LED

Operating Tips

• Operate the mouse on a white or light-colored surface within 7 m (30 ft.) of the receiver
for optimal performance.
• The mouse automatically enters a sleep mode after a period of inactivity to save power.
Press any key or scroll to wake it.
• If the Low Battery LED flashes when the mouse is moved, change or re-charge the
batteries immediately.
• When the mouse isn't being used, store the receiver and set the Power switch to Off.
Remove the batteries if the mouse will not be used for an extended period.
2
177139_03_man_ML.indd 2
USB cable port
Power
switch
DPI
button
Laser
sensor
2 AAA
batteries
Battery
compartment cover release
English
MlX Wireless laser Mini Mouse, Model
®
Battery compartment cover
Scroll wheel
English
USB micro receiver
(storage slot circled)
5/27/10 12:07:56 PM