Periodic Maintenance - Sanity SANY-MED-80 Bedienungsanleitung

3.1. SANY-MED-80 UNIT TECHNICAL DATA
Technical data:
Structure: AISI 430 STEEL
Ozone production: CORONA DISCHARGE SYSTEM at ≈ 5 grh
Abatement equipment ozone: present.
Power: 110/250 V – 50/60 Hz
Installed output: 50 W max
Insulation class IP41
Fuse: A 2
Measurements: W30xD12xH22
Weight: 3,5 kg
Max. treated volume: 80 m
Working temperature: +4°C / +40°C – Max. relative humidity 90%
The SANY-MED-80 unit is manufactured in accordance with the following
legislation:
Directive 2006/95/EEC and subsequent amendments and integrations.
Directive 2004/108/EEC and subsequent amendments and integrations.
Directive 2011/65/EEC and subsequent amendments and integrations.
Italian Decree Law 81/2008 health and safety at the workplace.

4.1. PERIODIC MAINTENANCE

Only qualified and authorised SANITY SYSTEM ITALIA Srl technicians must
carry out the operations to find any faults and to replace any parts, otherwise the
product guarantee will no longer be valid.
The user may only carry out these operations further to written authorisation from
SANITY SYSTEM ITALIA Srl.
The customer must always contact SANITY SYSTEM ITALIA Srl when the hour
meter reaches 1500 cycles to arrange servicing.
The guarantee only covers units supplied by SANITY SYSTEM ITALIA Srl,
covering any parts that are found faulty within 12 months from the date of
- SECTION 3 -
TECHNICAL DATA
3
REFERENCE LEGISLATION
- SECTION 4 -
UNIT MAINTENANCE
- SECTION 5 -
GUARANTEE
EN
13