Herunterladen Inhalt Inhalt Diese Seite drucken
Vorschau ausblenden Andere Handbücher für Seaman 37:

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

All manuals and user guides at all-guides.com
Seaman 37
Seaman 45 GPS / Auto-Skew
Seaman 60 GPS / Auto-Skew
Bedienungsanleitung

Werbung

Inhaltsverzeichnis
loading

Inhaltszusammenfassung für Megasat Seaman 37

  • Seite 1 All manuals and user guides at all-guides.com Seaman 37 Seaman 45 GPS / Auto-Skew Seaman 60 GPS / Auto-Skew Bedienungsanleitung...
  • Seite 2: Inhaltsverzeichnis

    All manuals and user guides at all-guides.com Inhaltsverzeichnis 1. Einführung 1.1 Allgemeine Informationen Bitte lesen Sie die Bedienungsanleitung sorgfältig vor Inbetriebnahme des Gerätes. Bei falscher oder unsachgemäßer Handhabung erlischt der Gewährleistungsanspruch. Hinweis: Falls Sie schon ähnliche Produkte installiert haben, muss die Vorge- 1.
  • Seite 3: Einführung

    All manuals and user guides at all-guides.com 1. Einführung 2. Installation 1.4 Systemkomponenten 2.1 Anschluss der Komponenten Montieren Sie das Steuergerät und den Satelliten Receiver im Fahrzeuginneren. Achten Sie auf eine sorgfältige Verlegung der Kabel, um Kurzschlüsse zu vermeiden. Achten Sie Antenneneinheit hierbei auch auf schon vorhandene Kabel.
  • Seite 4: Das Steuergerät

    All manuals and user guides at all-guides.com 2. Installation 2. Installation 2.2 Das Steuergerät 2.3 Wahl des Standortes Satellitenauswahl Direct Broadcast Service (DBS) strahlt Audio, Video und Daten über den Satelliten aus, der Hauptschalter Display (hoch / runter) Reset sich in 35.000 km Höhe über der Erde befindet. Mit einer Empfangsstation wie der Antenne und einem Satelliten Receiver werden die Signale vom Satelliten empfangen und verar- beitet.
  • Seite 5: Inbetriebnahme Und Bedienung

    2.5 Skew Einstellungswerte für europäische Hauptstädte Folgende Einstellungen müssen Sie nur beim 1. Schalten Sie das Steuergerät am Hauptschalter ein. Die grüne LED-Anzeige (PWR) am Seaman 37 (ohne Auto Skew) vornehmen. Steuergerät leuchtet auf - der Bootvorgang startet. 0° 2. Nach dem Bootvorgang werden die vorinstallierten Satelliten im Display angezeigt.
  • Seite 6: Fehlerbehebung

    Sie einen Fachhändler zur Überprüfung auf. 4. Schalten Sie nun das Steuergerät ein. Das Steu- Satellit wird nicht gefunden (nur beim Seaman 37 ohne Auto Skew) ergerät bootet und startet den Updatevorgang Sollte die Antenne keinen Satelliten finden, überprüfen Sie die Skeweinstellung des automatisch.
  • Seite 7: Ausleuchtzone

    All manuals and user guides at all-guides.com 5. Ausleuchtzone 6. Montageabmessungen Seaman 37 Seaman 45 GPS/AutoSkew Seaman 37 Seaman 60 GPS/AutoSkew Hinweis: In den Randgebieten der Ausleuchtzone kann es zu Empfangsstörungen kommen. DEUTSCH DEUTSCH...
  • Seite 8 All manuals and user guides at all-guides.com 6. Montageabmessungen 6. Montageabmessungen Seaman 45 Seaman 60 55 cm 80 cm 30 cm 25,8 cm DEUTSCH DEUTSCH...
  • Seite 9: Technische Daten

    All manuals and user guides at all-guides.com 7. Technische Daten Konformitätsinformation Hiermit erklärt die Firma Megasat Werke GmbH, dass sich folgendes Gerät in Überein- Seaman 37 Seaman 45 Seaman 60 stimmung mit den grundlegenden Anforderungen und den übrigen einschlägigen Antennen Typ...
  • Seite 10 All manuals and user guides at all-guides.com Seaman 37 Seaman 45 GPS / Auto-Skew Seaman 60 GPS / Auto-Skew User manual Version 3.7 (Februar 2020) // Technische Änderungen, Druckfehler und Irrtümer vorbehalten. Megasat Werke GmbH | Industriestraße 4a | D-97618 Niederlauer | www.megasat.tv | info@megasat.tv...
  • Seite 11 All manuals and user guides at all-guides.com Content 1. Introduction 1.1 General Information Please read the manual thoroughly before operating the equipment. In case of incorrect or improper handling of the warranty becomes void. Note: If you have already installed similar products, the procedure does not 1.
  • Seite 12: System Components

    All manuals and user guides at all-guides.com 2. Installation 1. Introduction 1.4 System Components 2.1 Connecting the components Install the control unit and the set-top box inside the vehicle. Maintain a careful instal- lation of the cable in order to avoid short circuits. Pay attention also to existing cables. Antenna unit The elegant plastic housing will protec- Connect the antenna as shown in the illustration below:...
  • Seite 13: The Control Unit

    All manuals and user guides at all-guides.com 2. Installation 2. Installation 2.2 The contron unit 2.3 Selecting the location Satellite selection Direct Broadcast Service (DBS) satellites broadcast audio, video and data information Main power Display (up / down) Reset from satellites located 22.000 miles in space. A receiving station, such as the antenna, should include a dish and satellite receiver to receive the signals and process them for use by the consumer audio and video equipment.
  • Seite 14: Startup And Operation

    2.5 Skew setting values for European capitals 1. Turn on the control unit at the main switch. The green LED (PWR) on the control unit The following settings are only for the Seaman 37 lights up - the boot process starts.
  • Seite 15: Troubleshooting

    IMPORTANT: Do not turn off the con- Satellite can‘t be found (only for Seaman 37 without Auto Skew) trol unit during the update procedure in If the antenna has not found satellites, check the Skew settings for the satellite at your order to avoid any damage! location.
  • Seite 16: Footprint

    All manuals and user guides at all-guides.com 5. Firmware Update 6. Mounting dimensions Seaman 37 Seaman 45 GPS/AutoSkew Footprint Footprint Seaman 60 GPS/AutoSkew Note: Footprint In the outlying areas of the footprint there may be interference. ENGLISH ENGLISH...
  • Seite 17 All manuals and user guides at all-guides.com 6. Mounting dimensions 6. Mounting dimensions Seaman 45 Seaman 60 55 cm 80 cm 30 cm 25,8 cm ENGLISH ENGLISH...
  • Seite 18: Specifications

    All manuals and user guides at all-guides.com 7. Specifications Conformity information Hereby, Megasat Werke GmbH declares that the following product is in compliance with Seaman 37 Seaman 45 Seaman 60 the essential requirements and other relevant provisions of directives 2014/30/EU (EMC),...
  • Seite 19 All manuals and user guides at all-guides.com Seaman 37 Seaman 45 GPS / AS Seaman 60 GPS / AS Mode d’emploi Version 3.7 (February 2020) // Technical changes, misprints and errors reserved. Megasat Werke GmbH | Industriestraße 4a | D-97618 Niederlauer | www.megasat.tv | info@megasat.tv...
  • Seite 20 All manuals and user guides at all-guides.com Sommaire 1. Introduction 1.1 Informations générales S‘il vous plaît lire attentivement le manuel avant d‘utiliser l‘appareil. Une manipulation incorrecte ou inappropriée de la garantie expire. Remarque – Veuillez lire soigneusement le manuel d’utilisation avant de com- 1.
  • Seite 21: Composants De Système

    All manuals and user guides at all-guides.com 1. Introduction 2. Installation 1.4 Composants de système 2.1 Schéma de raccordement Ne montez pas l’appareil de commande et le récepteur satellite dans la zone d’un airbag dans l’intérieur de votre véhicule. Faites attention à la pose correcte des câbles afin d’évi- Unité...
  • Seite 22: L'appareil De Commande

    All manuals and user guides at all-guides.com 2. Installation 2. Installation 2.2 L’appareil de commande 2.3 Diffusion par satellite Interrupteur Sélcetion d’un satellite Direct Broadcast Service (DBS) diffuse des fichiers audio, vidéos et données par satellite qui principal Ecran (haut / bas) Confirmer se trouve 35.000 km au-dessus de la terre.
  • Seite 23: Mise En Service Et Commande

    Les réglages suivants doivent seulement être effec- 1. Allumez l’appareil de commande avec l’interrupteur principal. Puis, l’indicateur à DEL tués concernant le Seaman 37 (sans auto Skew). vert (PWR) de l’appareil de commande est allumé – le démarrage commence. 0°...
  • Seite 24: Dépannage

    Veuillez contacter votre revendeur pour une vérification. 3. Insérez la clé USB avec le firmware actuel dans le Satellite n’est pas trouvé (seulement Seaman 37 sans Auto Skew) port USB à l’avant. Si l’antenne ne trouve pas un satellite, vérifiez le réglage Skew du satellite pour votre 4.
  • Seite 25: Zone De Couverture

    All manuals and user guides at all-guides.com 5. Zone de couverture 6. Dimensions de montage Seaman 37 Seaman 45 GPS/AutoSkew Seaman 37 Zone de couverture Zone de couverture Zone de couverture Zone de couverture Seaman 60 GPS/AutoSkew Remarque: Zone de couverture Dans les zones périphériques de la zone...
  • Seite 26 All manuals and user guides at all-guides.com 6. Dimensions de montage 6. Dimensions de montage Seaman 45 Seaman 60 55 cm 80 cm 30 cm 25,8 cm FRANÇAIS FRANÇAIS...
  • Seite 27: Spécifications Techniques

    All manuals and user guides at all-guides.com 7. Spécifications techniques Extrait de la déclaration de conformité Par la présente, Megasat Werke GmbH déclare que les appareils suivants sont conformes Seaman 37 Seaman 45 Seaman 60 aux exigences essentielles et aux autres dispositions pertinentes des Directives 2014/30/ Type d’antenne...
  • Seite 28 All manuals and user guides at all-guides.com Version 3.7 (Février 2020) // Sous réserve de modifications techniques, de fautes d’impression et d’ e rreurs. Megasat Werke GmbH | Industriestraße 4a | D-97618 Niederlauer | www.megasat.tv | info@megasat.tv...

Inhaltsverzeichnis