After Using; Cleaning And Maintenance; Cleaning The Appliance; Storage - Beem Multi-FiXX 1300 Bedienungsanleitung

16 EN
Chopping, rasping, crown attachment (10,
12-14):
1. First put the required attachment onto the
supporting disc:
Hook in the short locking latch from above
into the supporting disc. The press the long
locking latch from below until it snaps in (im-
age A).
2. Put the spindle attachment (21) onto the
drive spindle of the motor unit first and then
the jug.
3. Put the supporting disc with the mounted
attachment onto the spindle attachment. The
selected rasping or chopping side points up-
wards.
4. Put the lid (2) onto the jug (3).
You can now begin with chopping, rasping or
grating.
5. To remove the cutting, grating or crown
attachment, turn the supporting disc over.
6. Release the long locking latch by moving
it towards the middle
(image B).
Using the grinder (image C)
General instructions
The grinding unit (7) is suitable for grind-
ing coffee beans and nuts, as well as spices
such as pepper corns, coarse salt or dried
herbs.
All food that can melt such as chocolate
or cheese is not suitable.
Grinding food
1. Remove the blade unit from the mixer by
turning it anticlockwise.
2. Unscrew the sprinkler lid from the grinder
container and turn the container over.
3. Put the food into the grinder jug (7) and
lock it with the blade unit (17). Pay attention
to proper seating of the sealing ring. It must
fit smoothly all round.
4. Turn this unit over and place the grinding
unit (7) onto the drive unit (4) and lock it by
turning to the right.
5. Insert the plug into the mains socket and
turn the rotary switch (5) to impulse or con-
tinuous operation.
All manuals and user guides at all-guides.com
ATTENTION
ing time of 2 minutes.
minute.
1.
out of the mains socket.
2.
with water.
3.
described in the section Cleaning and main-
tenance (page 16).
Before beginning any work, pay attention to
the safety instructions in the section Safety
instructions (page 10)!
1.
damp cloth.
2.
washing-up liquid solution or in the dish
washer.
3.
after cleaning.
removed more easily if you allow them to
soak in warm washing-up liquid solution for
10 minutes before cleaning.
after processing very salty ingredients.
gredients, the plastic parts of the appliance
can become discoloured. Rub these parts
with cooking oil before cleaning them.
If you do not intend to use the appliance for a
longer period of time, clean it as described in
the section Cleaning and care Cleaning and
maintenance (page 16).
BEEM - Elements of Lifestyle
Pay attention to the maximum operat-
Allow the appliance to cool down for 1

After using

Switch off the appliance and pull the plug
Rinse the jug and the accessories used
Clean the appliance and parts used as

Cleaning and maintenance

Cleaning the appliance

Wipe the motor unit (4) with a slightly
All other parts can be cleaned in a warm
Dry all parts of the appliance thoroughly
NOTE
Dried and caked food residues can be
Rinse the chopping blade immediately
After processing strongly coloured in-

Storage