Beem Multi-FiXX 1300 Bedienungsanleitung Seite 19

BEEM - Elements of Lifestyle
Mixing drinks
1. Place the blender jug (18) onto the motor
unit (4) with the handle to the right.
2. Turn the blender jug clockwise until it au-
dibly snaps in.
3. Put liquid/fruit into the blender.
4. Place the lid of the blender (19) onto the
blender jug.
5. Lock the lid by turning it clockwise.
6. Place the lid lock (20) onto the lid of the
blender.
7. Insert the plug into the mains socket.
8. Insert the plug into the mains socket and
turn the rotary switch (5) to impulse or contin-
uous operation when using ice cubes in ICE.
9. To stop the function, turn the rotary switch
to OFF.
ATTENTION
Pay attention to the maximum operat-
ing time of 2 minutes.
Allow the appliance to cool down for 1
minute.
Refilling:
1. Switch off the appliance.
2. Remove the lid lock (20).
3. Put the ingredients into the blender jug.
4. Close the lid again with the lid lock.
Using the jug with the copper blades
General instructions
Make sure that the jug (3) and the jug
lid (2) are seated properly, otherwise the ap-
pliance cannot be operated (safety switch).
During operation, the pusher (1) should be
inserted in the jug lid (2) to prevent anything
squirting out of the appliance.
Pay attention to the maximum filling quan-
tity of the jug (1200 ml).
Remove the chopping blade before empty-
ing the jug.
WARNING
Danger from sharp blades!
Do not touch the chopping blades (6).
Always hold the chopping blade by the
plastic shaft.
All manuals and user guides at all-guides.com
Chopping food
1.
drive spindle of the motor unit (4).
2.
to the right onto the motor unit.
3.
snaps in.
4.
dle attachment (21).
5.
6.
7.
bly snaps in.
8.
of the jug lid (2).
9.
10.
tion.
11.
to OFF.
Refilling:
1.
2.
3.
4.
5.
bly snaps in.
ATTENTION
ing time of 2 minutes.
minute.
The paddle mixer (6) and stirring attach-
ment (15) are used in the same way as the
chopper blades by putting them onto the
spindle attachment.
To squeeze citrus fruits, simply place the col-
lecting bowl and the grater attachment (16)
onto the spindle attachment. The fruit juice is
collected in the jug.
Put the spindle attachment (21) onto the
Place the jug (3) with the handle pointing
Turn the jug clockwise until it audibly
Put the chopping blade (6) onto the spin-
Put the food into the jug.
Put the lid (2) onto the jug (3).
Lock it by turning it clockwise until it audi-
Insert the pusher (1) into the filling shaft
Insert the plug into the mains socket.
Turn the rotary switch to the desired posi-
To stop the function, turn the rotary switch
Switch off the appliance.
Remove the jug lid (2).
Fill the jug (3) with the ingredients.
Put the lid back onto the jug.
Lock it by turning it clockwise until it audi-
Pay attention to the maximum operat-
Allow the appliance to cool down for 1
Using the jug with other accessory
parts
EN 15