Display And Connections - Ten-Haaft CARO Vision MA Bedienungsanleitung

Display and Connections

E
1
Power Supply (optional, if receiver doesn't provide l ( ti
power supply, cable enhanced)
2
socket: cable to the receiver
In the search mode, there are indicated some information items on the display.
The signal strength of the satellite, which is to be fi nding, is
indicated alpha numeric and bar code.
H/V Symbol for the vertical or vertical satellite frequency.
HI - /LO Symbol for the HIGH and LOW range.
LOCK Symbol for the found satellite
Working voltage:
The working voltage for the SAT FINDER is usually provided by the socket 2 (Recei-
ver connection).
A receiver with a LNB output current, more than 400mA, should be suffi cient.
(part of delivery)
4
l if i d
If the receiver can't provide the needed LNB output current, a
additional power supply can be connected to the socket 1. The
supplying power voltage has to be between 9 V and 28 V. Inside
the socket is a 2A fuse.
3 2
3 3
't id
4
32
1
socket: cable to the antenna (LNB) k t bl t th
socket: for service reasons