General Safety Instructions - LaserLiner ThermoMaître Bedienungsanleitung

Completely read through the operating instructions,
the „Warranty and Additional Information" booklet
!
as well as the latest information under the internet
link at the end of these instructions. Follow the
instructions they contain. This document must be
kept in a safe place and if the laser device is passed
on, this document must be passed on with it.
Function / Application
ThermoMaître is a professional thermometer for grilling,
cooking and roasting that determines the core temperature
of various types of meat, poultry and fish. Thanks to
high-speed sensors, the ThermoMaître measures in a matter
of seconds.

General safety instructions

– The device must only be used in accordance with its
intendedpurpose and within the scope of the specifications.
– Not suitable for explosive environments or medical
diagnoses.
– Keep the measuring device away from children.
– The structure of the device must not be modified in any way.
– Do not expose the device to mechanical stress, extreme
temperatures,
moisture or significant vibration.
– The measuring device must not be used in closed ovens.
– Thoroughly clean the sensor before and after use.
– The measuring instrument is not water tight. Only insert
the measuring
probe until it is approx. 10 mm below the connector.
– Only hold the device by the handle.
– Do not touch the measuring probe, it can become very hot
during the measuring procedure.
– Always protect the test prod by folding in the insertion
probe when not in use.
– Do not use the measuring probe with an external voltage.
Safety instructions
Dealing with electromagnetic radiation
– The measuring device complies with electromagnetic
compatibility regulations and limit values in accordance
with EMC-Directive 2014/30/EU.
– Local operating restrictions – for example, in hospitals,
aircraft, petrol stations or in the vicinity of people with
pacemakers – may apply. Electronic devices can potentially
cause hazards or interference or be subject to hazards or
interference.
– The measuring accuracy may be affected when working
close to high voltages or high electromagnetic alternating
fields.
ThermoMaître
05
EN