General Safety Instructions - LaserLiner ThermoInspector Bedienungsanleitung

Read the operating instructions and the enclosed
brochure „Guarantee and additional notices"
!
completely. Follow the instructions they contain.
This document must be kept in a safe place and
if the laser device is passed on, this document
must be passed on with it.
Function / application
The ThermoInspector is a professional multisensor thermo-
meter for ensuring hygiene in the food industry in accordance
with HACCP guidelines and temperature specifications in
production, food and beverage dispensing, sampling and
goods inwards inspection. The fold-out probe thermometer
is used to measure liquid, pasty and semisolid materials.
Surface temperatures can be determined with the infrared
sensor.

General safety instructions

– The device must only be used in accordance with its
intended purpose and within the scope of the specifications.
– Not suitable for medical diagnoses.
– The measuring tools and accessories are not toys.
Keep out of reach of children.
– Modifications or changes to the device are not permitted,
this will otherwise invalidate the approval and safety
specifications.
– Do not expose the device to mechanical stress, extreme
temperatures, moisture or significant vibration.
– The measuring device must not be used in closed ovens.
– Thoroughly clean the sensor before and after use.
– The measuring device is not water tight. Only dip the
measuring probe into the material up to approx. 10 mm
below the casing.
– Only hold the device by the handle.
– Do not touch the measuring probe, it can become very
hot during the measuring procedure.
– Always protect the measuring probe by folding in the
probe sensor when not in use.
– Do not power the measuring probe with an external
voltage.
Safety instructions
Using class 2 lasers
– Attention: Do not look into the direct or reflected beam.
– Do not point the laser beam towards persons.
– If a person's eyes are exposed to class 2 laser radiation,
they should shut their eyes and immediately move away
from the beam.
– Under no circumstances should optical instruments
(magnifying glass, microscope, binoculars) be used to
look at the laser beam or reflections.
10
EN
Laser radiation!
Do not stare into the beam!
Class 2 laser
< 1 mW · 650 nm
EN 60825-1:2014