Schneider Airsystems SIP 600 Original Bedienungsanleitung Seite 4

GB
SIP 600
Table of contents - Part 1
1.1 Scope of delivery ......................
1.2 Conventional use ......................
1.3 Technical data ..........................
1.4 Components.............................
1.5 Commissioning .........................
1.1 Scope of delivery
– Silicone puppet gun
– Instruction manual
1.3 Technical data
Air consumption
Max. permissible pressure
Working pressure (flow pressure)
Puppet size
Silicone puppet housing (diameter x length)
Silicone puppet length
Pulse sound pressure level L
as per DIN 45 635, part 20
Recommended hose diameter (inner) at L= 10 m
Overall dimensions: width x depth x height
Weight
1.4 Components
01 Plug nipple
02 Trigger lever
03 Air regulation
04 Cartridge housing
05 Union nut
07 Rubber piston with safety chain
1.5 Commissioning
Caution: Depressurise the unit!
1. Unscrew the
(Figure 2).
2. Connect the gun to the compressed air.
I/ 2
All manuals and user guides at all-guides.com
(at distance of 1 m)
pa
union nut (item 05)
1.2 Conventional use
The compressed air-operated
2
silicone puppet gun
2
is suitable for sealing joints; for example in
2
glass, ceramics, wood, metal,
2
masonry and plumbing with
2 commercially available:
• silicone puppets
With silicone or acrylic sealing compound, a
volume up to 600 ml and a maximum diam-
eter of 50 mm.
The silicone puppet gun is not suitable for
cartridges.
Any other type of use is considered contrary
to the intended use.
3. Press the trigger lever (item 02). The
rubber piston (item 07) is pushed for-
ward, held by the safety chain.
4. Disconnect the gun from the compressed
air.
5. Guide the rubber piston into the housing
and press it backwards using the silicone
puppet (Figure 3). This avoids air pock-
ets.
6. Cut the silicone puppet open at the front.
7. Inset the nozzle into the union nut
(item 05).
8. Screw the union nut (item 05) tightly
(Figure 6).
100 l/min
8 bar
1-8 bar
≤ 600 ml
50,3 x 370 mm
330 mm
71 dB(A)
6 mm
515 x 70 x 215 mm
1,4 kg