Werbung
Verfügbare Sprachen
Verfügbare Sprachen
REMOVAL OF LINING:
Detach the hood by removing the 3 knobs holding the hood
to the wicker body. (picture 6)
Be careful not to scratch the lining or the outside fabrics on
the screw ends while removing the hood!
Take out the lining (picture 7) –
not tumble dry!
INSTALLATION OF LINING:
Reverse above procedure – taking great care when
mounting the hood not to damage this.
Wicker is a natural material absorbing –or giving off-
moisture from/to the air. Through this it could look like the
fabric parts are too loose or to small after washing – also the
hood might be harder to mount as to detach.
But all parts have been designed to make room for this
natural change, so it should not cause any problem.
WARNING Make sure that the child is in the distance when the
product is unfolded and folded.
WARNING Do not let the child play with the product.
WARNING Check if the device fixing of the seat or infant
restraint is properly locked before usage.
INSTALLING THE APRON:
Simply fix the apron to the hood with the two rubber bands
on the hood screws on both sides.
machine wash at 30°C – do
Werbung
