Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Chassis & pramtop
TO OPEN CHASSIS READY FOR USE:
Lift up handle. (picture 1a) and push
down the plastic brackets located on
both sides of the handle (picture 1b)
until they hold the handle and lower leg
firmly in position.
TO FOLD CHASSIS:
Reverse procedure, please make sure to release the
secondary safety lock on the right side (picture 2).
WARNING Make sure that all blocking
fixtures are blocked before the
usage
ATTACH THE PRAMBODY ONTO THE CHASSIS:
Position body on the chassis until the 2 rivets found on
either side are located in the cut – out sections on the
frame. Push forward until the rivets are held firmly in the
cut-outs.
Then push down the locking levers. (picture 3)
TO DETACH:
Reverse procedure, please make sure to release the
secondary safety lock on the right side!
OPENING/CLOSING THE HOOD:
Lift up the hood. Then gently press down the hoodarm, on
both sides at the same time, until they lock.
For closing the hood pull both hoodarms upwards at the
same time.
As the hood is fully reclinable, there is under normal
circumstances never the neccessity to remove the hood at
all – except when taking off the pramtop lining for washing.
Werbung
