eta ETA3297 Bedienungsanleitung Seite 44

GB
PROBLEM
Error message E 01 shows
E 02 shows
E 03 shows
E 04 shows
EExx, shows
on the display.
Warning "out " shows
message
VI. MAINTENANCE
Dust environment may affect the performance of the unit. Please use the soft cloth to clean
the whole unit before and after use. Don't use any abrasive or volatile cleaners.
In order to get the best performance, please follow the instructions below.
– Put in a dry (including adaptor) place and avoid the sunshine
– Avoid touching water, clean it with a dry cloth in case.
– Avoid intense shaking and collisions
– Avoid dusty and unstable temperature environment
– Using wet cloths to remove dirt
– Do not attempt to clean the reusable cuff with water and never immerse the cuff in water.
More extensive maintenance or maintenance requiring intervention in the inner parts
of the appliance must be carried out by a professional service!
Failure to comply with the instructions of the manufacturer will lead to expiration
of the right to guarantee repair!
SYMPTOM CHECK THIS
The cuff is too tight
or too loose.
The monitor detected
motion while
measuring.
The measurement
process does not de-
tect the pulse signal.
The treatment of the
measurement failed.
A calibration error
occurred.
Out of measurement
range
Refasten the cuff and then
measure again.
Movement can affect the
measurement.Relax for a
moment and then measure again.
Loosen the clothing on the
wrist and then measure again.
Relax for a moment and then
measure again.
Retake the measurement. If
the problem persists, contact
the retailer or our customer
service department for further
assistance. Refer to the
warranty for contact information
and return.
Relax for a moment. Refasten
the cuff and then measure
again. If the problem persists,
contact your physician.
44 / 66
REMEDY