NIXON THE DELTA II Bedienungsanleitung Seite 15

2
TIME FUNCTIONS CONT...
OPERATING THE CHRONO:
PRESS MODE so the display shows CHR
PRESS START/STOP to start the Chrono.
PRESS START/STOP while timer is running
to Stop the Chrono
PRESS and HOLD LAP/RESET while timer
is stopped to Reset the Chrono.
SETTING AND USING THE ALARM:
PRESS MODE so the display shows ALM
PRESS and HOLD MODE to enter Setting.
The setting sequence is the following: Hour, Minutes,
Date (if applicable) and Time zone (Time or T2)
PRESS the MODE button to advance
to the next setting field.
PRESS the START/STOP button to increase
the value of the blinking field.
PRESS the LAP/RESET button to decrease
the value of the blinking field.
PRESSing MODE after the last Setting Field
will exit Setting.
15