Herunterladen Inhalt Inhalt Diese Seite drucken

Einstellen Der Rutschkupplung - Carson X10E OnRoad BRUSHLESS Betriebsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

All manuals and user guides at all-guides.com
3. Rutschkupplung • Slipper Clutch
Hier eine Anleitung zur Rutschkupplung, die sowohl zur Antriebs-
steuerung als auch zum Schutz des Getriebes dient. In erster Linie
dient sie dazu, plötzliche starke Stöße auf die Antriebswelle abzu-
fangen, wie sie bei weiten Sprüngen oder hartem Gelände auftreten.
Zudem läßt sich mit ihrer Hilfe die Motorkraft auf die Räder einstellen,
500405473
um das Durchdrehen der Räder auf rutschigem Untergrund zu
begrenzen.
Here is the manual for the slipper-clutch device that offers both
traction control and protection for the transmission. The slipper is
primarily used to help absorb sudden impacts on the drivetrain
due to landing big jumps or driving in hard terrain. Additionally,
it can be used to smooth out the flow of power to the
wheels and limit wheel spin when running on
Pin 2 x 10.8 mm
extremely slick surfaces.
4 x 3 mm(set)T
Pin 2 x 10.8 mm

Einstellen der Rutschkupplung

Sie können die Rutschkupplung einstellen, indem Sie zur Verringerung
des Schlupfes die Einstellmutter im Uhrzeigersinn (nach rechts) drehen
und umgekehrt.
Bei richtiger Einstellung darf sich das Hauptzahnrad fast nicht mit dem
Daumen nach vorn drehen lassen, solange Sie die Räder festhalten.
3 x 10 mm
Um dies beim Fahren zu prüfen, schalten Sie das fahrfertige Fahrzeug
ein und stellen Sie ihn auf den Boden. Schubsen Sie ihn etwas rück-
wärts an und geben dann noch im Rückwärtsrollen Vollgas vorwärts.
Die Kupplung darf dabei nicht mehr als 2 - 3 cm weit durchrutschen,
während das Modell beschleunigt.
Slipper-clutch adjustments
500405474
Adjustments are made adjusting the slipper nut clockwise (to the
right) to reduce the slip or counterclockwise (to the left) to increase the
slip.
When adjusted properly, you should be able to hold the tires firmly
and barely be able to push the spur gear forward with your thumb. To
track test, switch the modelcar on and place it on the ground. As you
push it backwards, allowing it to roll freely, punch the throttle. The
500405357
slipper should slip no more than an inch or two as it accelerates.
500405473
500405474
CARSON X10E Onroad
21

Werbung

Kapitel

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

X10e onroad

Inhaltsverzeichnis