THOMSON MIC400BT Bedienungsanleitung Seite 33

Power supply
This unit operates via a 12 V
CR2025 batteries (included) for the remote control. Do not try to make the unit operate with
another power supply. You risk damaging the unit and voiding your warranty.
Use
Operation
• Press the POWER/SOURCE button to turn on the appliance. Keep it pressed down to
turn it off.
Automatic standby
When you are playing audio media from a connected accessory, the micro hi-fi automatically
goes into standby if:
• You don't press any buttons for 10 minutes:
• The connected accessory has not sent any audio data for 10 minutes.
Adjusting the volume
• Press the
• Check the screen display, which should confirm the volume adjustment.
Mute function
• Press the MUTE button on the remote control. The volume is muted and "Volume muted"
appears on the LCD screen. Press this button again to cancel the mute function.
Clock and timer
Setting the time and date
Once the appliance is plugged into the mains or following a power cut, the LCD displays the
current time and date. To change the time, the appliance must be in standby mode.
1. Press the CLOCK button. "CLOCK" appears: press ENTER to confirm. "Time wizard
interval" is displayed.
2. Press / to select "24H" or "12H" format. Press ENTER to confirm. The hour figures
flash on the screen.
3. Press /
screen.
to set the date, then ENTER to confirm. Press
4. Press /
"NO".
2,000 mA external powder adaptor (included) and requires
button to increase the volume. Press the
to set the hour, then ENTER to confirm. The minute figures flash on the
- EN 33 -
button to decrease the volume.
/ to select "YES" or