THOMSON MIC400BT Bedienungsanleitung Seite 31

hi-fi installed by a professional. Use the wall mounting accessories provided and the mounting
template to fit the micro hi-fi system to the wall.
• Use the wall mounting instructions sheet provided to mark the location for the plastic wall
plugs on the walls. Ensure that the marks are level before drilling.
• Drill 6.3 mm holes on the marks.
• Insert the plastic wall plugs supplied into the holes until these no longer protrude from
the wall.
• Fix the 2 spacer rings on the wall, using the screws provided and tighten the screws.
• Once the screws are tight, the screw heads must be approximately 0.6 cm from the
spacer rings. Align the holes at the rear of the main appliance with the screws placed on
the wall (see illustration):
d'entretoise
Screw
Spacer rings
- EN 31 -
Plastic
wall plugs