Herunterladen Diese Seite drucken

CONDTROL Digi Staff Bedienungsanleitung Seite 2

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Failure to observe the following rules may lead to electrolyte
leakage from the batteries and damage the device:
- Remove the batteries from the device if you don't use it for a
long time.
- Do not use batteries of different types, with different charge
level.
- Do not leave discharged batteries in the device.
UTILIZATION
Expired tools, accessories and package should be passed for
waste recycle. Please send the product to the following address
for proper recycle:
CONDTROL GmbH
Wasserburger Strasse 9
84427 Sankt Wolfgang
Germany
Do not throw the product in municipal waste!
According to European directive 2002/96/ЕC expired measuring
tools and their components must be collected separately and
submitted to environmentally friendly recycle of wastes.
WARRANTY
All CONDTROL GmbH products go through post-production
control and are governed by the following warranty terms. The
buyer's right to claim about defects and general provisions of
the current legislation do not expire.
1) CONDTROL GmbH agrees to eliminate all defects in the
product, discovered while warranty period, that represent the
defect in material or workmanship in full volume and at its own
expense.
2) The warranty period is 24 months and starts from the date
of purchase by the end customer (see the original supporting
document).
3) The warranty doesn't cover defects resulting from wear and
tear or improper use, malfunction of the product caused by
failure to observe the instructions of this user manual, untimely
maintenance and service and insufficient care, the use of non-
original accessories and spare parts. Modifications in design of
the product relieve the seller from responsibility for warranty
works. The warranty does not cover cosmetic damage, that
doesn't hinder normal operation of the product.
4) CONDTROL GmbH reserves the right to decide on replacement
or repair of the device.
5) Other claims not mentioned above, are not covered by the
warranty.
6) After holding warranty works by CONDTROL GmbH warranty
period is not renewed or extended.
7) CONDTROL GmbH is not liable for loss of profit or
inconvenience associated with a defect of the device, rental cost
of alternative equipment for the period of repair.
This warranty applies to German law except provision of the
United Nations Convention on contracts for the international
sale of goods (CISG).
In warranty case please return the product to retail seller or
send it with description of defect to the following address:
CONDTROL GmbH
Wasserburger Strasse 9
84427 Sankt Wolfgang
Germany

Werbung

loading