Transportation And Storage; Return Delivery - resideo Braukmann CBU142 Einbauanleitung

HAZARDOUS VOLTAGE!
Hazardous voltage
In combination with a signal, this symbol indicates
danger of injury from electrical voltage and
information for protection of electrical voltage.
CAUTION!
Machinery defect
In combination with the signal CAUTION, this
symbol indicates danger of the machine and its
functions.
3

Transportation and Storage

3.1 Check condition upon delivery
1. Check the contents of each package for damage upon
delivery.
2. In the case of transport damage estimate the extent,
document the damage and notify Resideo
immediately in writing.
3.2 Transportation
DANGER!
Overturning of the compact booster unit
Danger of being crushed by compact booster unit!

Never get the system tangled in electrical lines.

Follow the local safety regulations.

Consider weight, balance point and suspension point

Use only appropriate and authorised means of
transportation, as crane, fork lift or hand lift.

By using a crane, attach and transport the safety
separation station as illustrated otherwise move the
pallet with a forklift or pallet truck.
Fig. 1 Attaching the lifting means and transportation
Selecting the adequate transportation device for the weight
class.
GB
1. Remove packaging and caps in the connection
openings
2. Check the damage in transit.
3. Transport the compact booster unit to the assembly
site
4. Lift the compact booster unit with a suitable lifiting
device from the pallet
5. Sling the compact booster unit as shown.
6. Lift the compact booster unit with a suitable lifiting
device from the pallet and dispose the pallet
7. Put the compact booster unit carefully down at the
installation site.
3.3 Storage/Preservation
CAUTION!
Damage during storage caused by frost, humidity,
dirt, UV radiation or pests
Corrosion/Contamination of the compact booster unit!
Protect the compact booster unit against frost, do not
store outside.
CAUTION!
Damp, dirty or damaged openings and junctions
Leakage or damage of the compact booster unit!

Uncover openings in the compact booster unit only
during installation.

3.4 Return delivery

1. Remove the power plug from the plug socket
2. Rinse and clean the compact booster unit, especially
for harmful, explosive, hot or other high-risk fluids.
3. If pumped liquids have been transported whose
residues with the humidity lead to corrosion damage
or ignite in the event of oxygen contact, the compact
booster unit must be additionally neutralized and
blown through with anhydrous gas to dry.
4. The compact booster unit must always be
accompanied by a fully completed declaration of non-
objection. It is imperative that you indicate any applied
safety measures and decontamination measures.
3.5 Disposal
WARNING!
Hazardous or hot pump medium
Hazardous for humans and environment!

Collect and dispose drilling fluid

Wear protective clothing and mask if necessary.

Observe the legislature concerning disposal of
hazardous media.
4 MU1H-1382 GE23 R0521