Back Panel - Toshiba dynadock PA3541 Serie Benutzerhandbuch

Back panel

User's Manual
Optical S/PDIF digital out port: Use an optical
S/PDIF cable (not provided) to connect to your
digital audio equipment, e.g., Dolby Digital
Surround Sound receiver and speaker system
To use this connection, your receiver must have
an optical S/PDIF input.
DB9 Serial port: For connection to the serial device
you want to control.
4 USB 2.0 ports (A type female connector): For
connection to USB peripherals.
10/100 Mbps Ethernet port: For connection to the
Ethernet network via a network cable (not provided).
Cable holder holes: Allows you to hook the cable
holder once all of your devices are attached.
DVI video output port: For connection to a DVI
monitor (shown).
- or -
VGA video output port: For connection to a VGA
monitor (not shown).
USB port: For connection to the USB port of the
host computer.
Cable Lock Slot: Allows you to connect a cable lock
to help prevent theft (not provided).
Power jack: For connection to the provided AC
adaptor. The dynadock always needs an external
power supply for operation, as it does not take
power from the USB bus.
(Sample Illustration) Connections on the back of the dynadock
Introduction
EN-9