Disconnecting The Dynadock; Eject Dock - Toshiba dynadock PA3541 Serie Benutzerhandbuch

Disconnecting the dynadock

Eject Dock

When the dynadock is connected to your computer, the TOSHIBA
dynadock Utility can remove all devices with one-click. Please follow these
steps:
1. Right-click the icon in the system tray.
2. Select "Eject Dock" from the menu to start the eject process.
3. Wait before removing the dock from the system.
4. If the dock is removed from the system successfully, the icon in the
system tray will disappear. Disconnect the USB cable from your
computer's USB port.
CAUTION: If the dynadock is not disconnected safely by following the
above steps, or it is connected and then disconnected before it is detected
by the PC, the icon will disappear too. However, it is not recommended,
because it may cause loss of data and/or other damage to your PC and
devices connected through the dock, especially when they are still working.
User's Manual
(Sample Image) Eject Dock screen
(Sample Image) Undocking screen
Disconnecting the dynadock
EN-39