Eject Dock And Sleep - Toshiba dynadock PA3541 Serie Benutzerhandbuch

dynadock™

Eject Dock and Sleep

When the dynadock is connected to your computer, the TOSHIBA
dynadock Utility can remove all devices and let the system sleep instantly
with one-click. Please follow these steps:
1. Right-click the icon in the system tray.
2. Select "Eject and Sleep" from the menu.
3. Wait before removing the dock from the system.
4. If the dock is removed from the system successfully, the icon in the
system tray will disappear. Disconnect the USB cable from your
computer's USB port.
5. After that, the system will go into sleep mode.
CAUTION: If the dynadock is not disconnected safely by following the
above steps, or it is connected and then disconnected before it is detected
by the PC, the icon will disappear too. However, it is not recommended,
because it may cause loss of data and/or other damage to your PC and
devices connected through the dock, especially when they are still working.
EN-40
(Sample Image) Eject and Sleep screen
(Sample Image) Undocking screen
User's Manual