Turning The Power On And Off; Tutorial Overview; Loading Sd Cards - Tascam Mixcast 4 Bedienungsanleitung

2. Turn the nut on the DC plug to secure it to the DC IN 12V connector.
3.
Connect the AC adapter to an outlet.
V CAUTION
Always connect the included AC adapter (PS-P1220E NUT), which is
specified for use with this unit.
Use of a different adapter could cause malfunction, fire or electric shock.
Changing the outlet plug
NOTE
When purchased new, the included PS-P1220E NUT AC adapter speci-
fied for this unit already has an outlet plug (A) attached. There should
be no need to change the plug.
1.
Move the knob (1) on the PS-P1220E NUT AC adapter in the direc-
tion of the arrow and pull out the plug (A).
2.
Select the plug that matches the AC outlet from the 3 other types
included (B, C or D).
3. Move the knob (1) in the direction of the arrow again, and attach
the plug to the AC adapter.
1 1
This completes changing the outlet plug.
After changing the outlet plug, confirm that it is not loose or crooked
and that everything is normal before plugging it into an outlet.
V CAUTION
Do not use the adapter if there is anything abnormal about the plug
after changing it. Use when the plug is abnormal could cause fire or
electric shock.
Contact the retailer where you purchased the unit or a TASCAM cus-
tomer support service.
10
TASCAM Mixcast 4
1
1

Turning the power on and off

Turning the power on
Press the POWER button on the back of the unit once to turn it on. After
the Mixcast 4 logo appears on the touchscreen and startup completes,
the Home Screen will appear as shown below.
Home Screen
NOTE
A tutorial that explains the unit simply will appear the first time it is
turned on after purchase. Then, the Others Screen will open on the
touchscreen so that language and date/time settings can be made.
(See Setting the language, date and time page 11.)
Turning the power off
Press and hold the POWER button to turn the unit off.
When a pop-up appears on the touchscreen to confirm turning the pow-
er off, release the POWER button.
Pop-up Screen
Tap "Yes" on the touchscreen to run the shutdown procedure and turn
the unit off.

Tutorial overview

When the unit is turned on, a tutorial screen will open to explain the ba-
sics of operating the unit.
If the tutorial is unnecessary, tap 5 to close it.
Put a check in the "Hide Tutorial" checkbox before closing the message to
prevent it from being shown in the future. (This message will be shown
again if the unit is restored to its default settings. See the Reference
Manual for the procedures to restore the unit to its default settings.)

Loading SD cards

This unit uses SD cards for recording and playback.
This unit can use SD cards that are Class 10 or higher and compatible
with SD, SDHC or SDXC standards.
NOTE
This product does not include an SD card.
Please purchase any that you need for your uses.
We recommend using SD cards with capacities of at least 64 GB be-
cause multitrack recordings of all channel inputs use large amounts of
space.
A list of SD cards that have been confirmed for use with this unit can
be found by accessing the TEAC Global Site (http://teac-global.com).
Check the page for this product. You can also contact TASCAM cus-
tomer support service.