Before Using The Hair Clipper; Use; Changing Attachments; Operation - Fakir ExeCute 2 Blade Benutzerhandbuch

EN
WARNING!
Before cleaning with water, detach the palm rest from the power cord.
For Long-Lasting Batteries
• Charge the product before first use and when the battery is almost out of power.
• Operate your battery until it is out of power at least two times in a year.
• If your device has not been used for a long time, operate it until the battery is out of power
and then charge it for 2 hours.
• Do not leave your device plugged in for longer than 24 hours.
• Never charge your device in an environment below 10C°.
• Do not charge your appliance under direct sunlight or close to a heater.

Before Using the Hair Clipper

The hair to be cut should be clean and dry or wet. Comb your hair carefully before cutting it.
Place a towel around your nape and neck for preventing any hair from falling into your collar.

Use

Your appliance has been designed for use on wet and/or dry hair.

Changing Attachments

Your appliance has 6 different attachments for different purposes.
Push the attachment tab in the main body and pull the attached piece toward yourself and
remove it. Attach the desired piece to the upper unit of the body by pushing it. The click sound
means that the attachment is on place.
WARNING!
Make sure that the attachments supplied with your appliance are mounted so that they
may not fall into water during use.

Operation

You can operate the appliance by moving the on/off switch upwards (towards the head of the
product).

Turning off

You can turn off the appliance by moving the on/off switch downwards.
30