HP PSI PP 4050 XP Benutzerhandbuch Seite 197

Datamatrix barcode
EXAMPLE for DATAMATRIX
-
type
module width
position
height
width
data
The HEXDUMP data stream for this example is:
1B 2A 7A
30 30 78
33 32 57
69 6E 65
69 73 65
65 20 33
67 65 6E
Print sample:
Notes
The supported datamatrix barcodes are 10x10, 12x12, 14x14, 16x16, 18x18, 20x20, 22x22, 24x24,
•
26x26, 32x32, 36x36, 40x40, 44x44, 48x48, 52x52, 64x64, 72x72, 8x18, 8x32, 12x24, 12x36, 16x36,
and 16x48.
Type, module width, height, and width may be omitted for the next barcode if the value does not
•
change.
If the barcode is a square then only the width may be sent.
•
If the number of data bytes sent is less then or equal to the maximum number of bytes of the selected
•
code minus the bytes needed to switch to binary then binary coding will by performed. In other cases a
code dependent compaction will be done. If the compacted code does not fit into the data area of the
barcode then no barcode will be printed.
The error correction is ECC200.
•
Default Values
At system start and after a restart of the interpreter the module width will be set to 5, the width will be 52 and
the height 0. This leads to a default selected barcode of 52 x 52 will a module size of 0,432 mm.
= DATAMATRIX
= 0,423 mm (5/300")
= X=500, Y=500
= 32 modules
= 32 modules
= PSi Engineering ...
32 33 30
35 30 30
1B 2A 7A
65 72 69
72 66 65
31 36 0D
0D 0A
ESC * z 2 3 0 V
ESC * z 5 S
ESC * p 5 0 0 x 5 0 0 Y
ESC * z 3 2 H
ESC * z 3 2 W
ESC * z 6 0 Z PSi Engineering ...
56 1B 2A 7A
59 1B 2A 7A
36 30 5A 50
6e 67 20 47
6C 64 65 72
0A 35 37 30
35 53 1B 2A
33 32 48 1B
53 69 20 45
6D 62 48 0D
20 53 74 72
38 30 20 53
70 35
2A 7A
6E 67
0A 45
61 DF
69 65