Appendix A Programming Guide
The following variables can be programmed by the PJL command:
@PJL DEFAULT variable = value
$
PJL VARIABLE
POWERSAVE
KEEPTEMPHIGH
ALARMBELL
LANG
MENUACCESS
These variables can not be used by the PJL COMMAND SET.
Note:
For detailled description of parameters see Chapter 4 Explanation of
Individual Menu Items
A-14
VALUES
OFF, 15, 30, 45, 60
ALWAYS, 0.5, 1, ....., 60 (in steps of 0.5 sec)
ON, OFF
ENGLISH, GERMAN, FRENCH, SPANISH
ALL, PROFILESONLY, NONE