A-3.6 Macro Control Commands - HP PSI PP 4050 XP Benutzerhandbuch

A-3.6 Macro Control Commands

MACRO CONTROL
COMMANDS
ESC & f # Y
ESC & f # X
For detailled informations see HP PCL 5 Technical Reference Manual.
Note:
Description
Macro ID
Macro Control
# = 0 : Start macro definition (last ID
specified)
# = 1 : Stop macro definition
# = 2 : Execute macro (last ID specified)
# = 3 : Call macro (last ID specified)
# = 4 : Enable macro for automatic
overlay (last ID specified)
# = 5 : Disable automatic overlay
# = 6 : Delete all macros
# = 7 : Delete all temporary macros
# = 8 : Delete macro (last ID specified)
# = 9 : Make macro temporary
(last ID specified)
# = 10 : Make marco permanent
(last ID specified)
Appendix A Programming Guide
A-23