A-2.1.2 Pjl Environments - HP PSI PP 4050 XP Benutzerhandbuch

Appendix A Programming Guide
A-2.1.2 PJL Environments
A-8
The factory default is stored in the
flash memory of the printer and can
not be changed by the user
After power on or after RECALL
FACTORY or after @PJL INITIALIZE
the printer default settings are copied
from the Factory Defaults
Environment into the User Default
Environment
The User Default Environment
settings are modified using the
operator panel keys and/or the @PJL
DEFAULT command
When a PJL reset occurs, the User
Default Environment settings are
loaded into the PCL Current
Environment
The PCL commands as part of the
application data streams changes the
PJL Current Environment settings
using the @PJL SET command
settings
A language reset (ESC E or @PJL
ENTER LANGUAGE) loads the PJL
Current Environment settings into the
Modified Print Environment