PALAS U-SMPS Bedienungsanleitung Seite 123

Wichtig!
6787-de_V2.1_08/21
Ab Kanal 142 werden Änderungen an den Sollwerten eines Kanals sofort
übernommen. Ändern Sie die Werte dieser Kanäle deshalb nicht während
des Scan- oder Klassiervorgangs.
Kanal- Inhalt des Datenkanals
Nummer
142 DEMC properties – sheath flow rate [l/min]
143 DEMC properties - inner radius [mm]
144 DEMC properties - outer radius [mm]
145 DEMC properties – length [mm]
146 DEMC properties – sample flow rate [l/min]
147 DEMC properties – residence time [s]
148 Scanning procedure – scheduling [min]
149 Aerosol properties – dilution [-]
150 Aerosol properties – density [kg/m³]
151 Aerosol properties – form factor [-]
152 DEMC properties -transfer function – C [-]
153 DEMC properties - transfer function – d_0 [nm]
154 Scanning procedure – minimum diameter [nm]
155 Scanning procedure – maximum diameter [nm]
156 Scanning procedure – scan time [s]
157 Scanning procedure – pre-scan stabilization time [s]
158 Scanning procedure – modus [1=upscan, 2=downscan, 3=up-
and downscan averaging, 4=up- and downscan single each]
159 Gas type [0=air, 1=argon]
160 electrode polarity
[0=positive, 1=negative]
161 Charging unit
[0=Kr85, 1=X-ray]
162 Valve (AUX port) [0=OFF; 1=ON]
13 Übertragungsprotokolle
123