Herunterladen Inhalt Inhalt Diese Seite drucken

De-Scaling - Inventum KZ915GD Gebrauchsanleitung

Grind & brew koffiezetter
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

10

de-scaling

Regularly de-scale your coffee machine. The de-scaling intervals depend on the hardness of the mains water and the frequency at
which the coffee machine is being used. We recommend de-scaling the coffee machine approximately after each 60 times of making
coffee. Due to scaling, the heating element can become obstructed. This causes overheating, as a result of which the coffee machine
is switched off automatically as a safety precaution and will no longer function. The coffee machine will have to be repaired. You can
de-scale the coffee machine with a special de-scaling agent for coffee machines or with kitchen grade vinegar. If you use a special
de-scaling agent for coffee machines, you must observe the instructions on the packaging of this agent.
When using kitchen grade vinegar, proceed as follows:
1. Remove the plug from the socket, allow the appliance to cool down properly and remove all separate components.
2. To remove any remaining water, hold the appliance upside down above the sink.
3. Place all separate components back in the appliance and place an empty filter bag in the filter holder. Fill the water reservoir with
clean, cold water and cold kitchen grade vinegar up to the 12 mark. The water and kitchen grade vinegar ratio should be 4:1.
4. Insert the plug in an earthed wall socket and set the clock. Check that the grinding function is switched off, if so, the indicator light at
the button
lights up. If the indicator light does not light up, press button
5. Press the button
to start the de-scaling process.
6. The de-scaling process has been completed when the water reservoir and coffee filter are empty. Empty the glass jug and remove
the filter bag from the filter holder, once the appliance has cooled down. Repeat steps 1 and 2 to allow any remaining water to run
out of the water reservoir and place all separate components back in the appliance.
7. After de-scaling, allow a full reservoir of cold water to flow through the appliance at least 3 times, to remove all de-scaling liquid and
vinegar residues and thus prevent a sour taste in the coffee.
Attention! If the coffee machine has not been used for some time, e.g. due to vacation, it is recommended to remove and clean all
separate components. Then place the cleaned separate components back in their place and allow the coffee machine to make one
run with clean water. In this way you will prevent a possible foreign taste.
18
English
once to switch off the grinding function.

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis