Render Inoperative; Proper Disposal; Application Advice - BaSt-ING Schleiferl Bedienungsanleitung

9.

Render inoperative

If the grinder is not needed for a long time, please store it as follows:
• C lean the grinder from dirt, such as sanding dust. Non-corrosive brake and parts cleaners are
permitted as cleaning agents, e.g. Liqui Moly AIII 3389.
• S tore the grinder in a dry place and in a temperature range of –15°C to +35°C.
• A brasive belts should be stored at 18–22 ºC and 45–65 % relative humidity.
• H armful influences from moisture, frost and large temperature fluctuations as well as mechanical
damage should be avoided.
• R eserve sanding belts should be stored on a bar or hook with a diameter of at least 50 mm.
10.

Proper disposal

Grinders, accessories and packaging should be recycled in an environmentally friendly manner.
Do not throw the grinder in the trash. The grinder consists of high quality materials, such as
Steel (shafts, bearings; sheet metal, screw connections), aluminum (support tube & sliding plate),
ABS plastic (drive roller).
There are no questionable hazardous substances installed. The built-in materials can be disposed of
in a recycling center.
Dispose of the components separately according to their materials. If you have any questions about
disposal, the BaSt-Ing team is at your disposal:
Email: info@bast-ing.de | Tel.: +49 (0)179/433 79 56
11.

Application advice

Customer service answers your questions about repair and maintenance of your product as well
as spare parts. Exploded drawings and information on spare parts will be made available to you on
request:
Email: info@bast-ing.de | Tel.: +49 (0)179/433 79 56
– 31 –