Panasonic WV-CP280 Bedienungsanleitung Seite 14

n
Bundle the coaxial cable and the power cord onto the camera mount bracket with cable
ties (procured locally).
Important:
• When bundling the cables with cable ties, cable ties with enough tolerable intensity
and durability should be used, such as metal cable ties, as a coaxial cable may have
to support the camera if it falls from the camera mount bracket.
Camera mount bracket
(option)
Bundle the cables and fix
them onto the camera
mount bracket firmly.
m
Adjust the focus position.
Loosen the flange-back lock screw and rotate the flange-back adjustment ring to adjust the
focus position while monitoring the video monitor. When completing the adjustment, tighten
this screw.
Recommended tightening torque: 0.05 N·m {0.5 kgf·cm}
Important:
• When the screw is tightened stronger than the recommended tightening torque, it may
strip the thread or cause focus misalignment.
Notes:
• When using a fixed-focal lens featuring the focus adjustment, adjust the flange-back
length after setting the lens focus to the FAR end.
• When using a vari-focal lens featuring the focus adjustment, refer to the operating
instructions of the lens in use.
14
All manuals and user guides at all-guides.com
Example: Ceiling mount
installation
Bundle the cables and fix
them onto the camera
mount bracket firmly.
Camera mount bracket
(option)
Example: Wall mount
installation