Blaupunkt 5VT7X00EME Bedienungsanleitung Seite 88

Step 2: Installation of the panel
The wooden panel can be worked according to the installation drawings.
Fully integrated model
Attach the hook to the wooden panel and insert the hook into the slot of the outer door of the
dishwasher (see figure A). After positioning the panel, it is fixed to the outer door with screws and
bolts (see figure B).
A
Step 3: Adjusting the door spring tension
1. The door springs are adjusted at the factory to
the correct tension for the outer door. If wooden
panels are installed, you must adjust the door
spring tension. Turn the adjusting screw to use
the adjuster to tension or loosen the steel cable.
2. The door spring tension is correct if the door
remains horizontal in the fully open position, but
folds up to close with a light touch of the finger.
1. Remove the four short screws.
B
2. Insert the four long screws.
38